This product is produced strictly in accordance with the technical requirements of SJ/T10796-2001 and meets the technical requirements of the British MOB standard and the American CISCA standard.

Floor specifications: 500 × 500 × 28mm/600 * 600 * 33mm

Floor laying height: (total laying height from ground to floor surface) 50mm or more is optional.

Mechanical properties of flooring:

Concentrated load is 2950/4450N (deflection ≤ 2mm)

Uniformly distributed load 12500/23000N/㎡

Ultimate load ≥ 8850/13350N.

Impact resistance of raised floor:

There should be no collapse in the experimental area, and the permanent deformation on the floor should be ≤ 1.5mm.

Floor appearance dimensions:

The limit deviation of the board width is 0/-0.4mm;

Limit deviation of plate thickness ± 0.3mm

Surface flatness ≤ 0.6mm

The perpendicularity of adjacent edges is ≤ 0.3mm.

Fireproof performance:

Comply with the technical requirements of GB50222-95 "Code for Fire Protection Design of Interior Decoration of Buildings" and GB8624-97 "Test Method for Non combustibility of Building Materials":

The performance of Class A non combustible materials.

Floor support:

The support should remain intact for 1 minute under a load of 20KN.

Bracket appearance:

The rust proof layer on the surface of the metal parts is not peeled off and there are no obvious defects.

System weight:

The weight of the entire elevated network activity floor system shall not exceed 40kg/㎡.