Floor Material Description:

1. The substrate of this product is made of calcium silicate board substrate.

2. The surface layer adopts various veneers such as HPL/PVC/anti-static tiles.

3. Seal the surroundings with black conductive adhesive tape.

Product Performance Description:

This product is produced strictly in accordance with the relevant technical requirements of national standards and meets the technical requirements of the British MOB standard and the American CISCA standard.

Obtain the activity floor inspection report from the Information Industry Anti static Product Quality Supervision and Inspection Center

Obtain the environmental testing report on formaldehyde emissions from the National Building Materials Testing Center;

Obtain the Environmental Protection Testing Report for Radioactive Substances from the National Building Materials Testing Center;

Obtain fire detection reports from authoritative departments

Floor specifications: 600 × 600 × 32/35/38mm

Anti static performance: 1 × 105~1 × 1010 ohms

Floor laying height: The total laying height from the ground to the floor surface can be selected as 80mm or more.

Floor appearance dimensions:

The limit deviation of the board width is 0/-0.4mm;

Limit deviation of plate thickness ± 0.3mm

Surface flatness ≤ 0.6mm

The perpendicularity of adjacent edges is ≤ 0.3mm.

Ultimate performance of flooring:

Concentrated load of 4450/5560N (deflection ≤ 2mm)

Uniformly distributed load 23000/33000N/㎡

Ultimate load ≥ 13350/16680N.

Impact resistance of raised floor:

There should be no collapse in the experimental area, and the permanent deformation on the floor should be ≤ 1.5mm.

Fireproof performance:

Comply with the technical requirements of GB50222-95 "Code for Fire Protection Design of Interior Decoration of Buildings" and GB8624-97 "Test Method for Non combustibility of Building Materials":

The performance of Class A non combustible materials.

Floor support:

The bracket is a simulated imported bracket, hot-dip galvanized;

The support should remain intact for 1 minute under a load of 20KN.

Bracket appearance:

The rust proof layer on the surface of the metal parts is not peeled off and there are no obvious defects.

Typical applications:

Data center, R&D center, control hall, central control room, etc