banner
Product Center
Anti-Static Floor Network Floor Ventilation Floor Wall Panel System Ceiling System
Jingtong Carbon Steel Ventilation Panel 46％
Floor Material Description:

1. The base material of this product is welded with steel plates.

2. The surface layer adopts various veneers such as anti-static HPL/PVC/anti-static ceramic tiles, etc

3. Product specifications: 600 * 600 (special specifications can be customized)

Product Performance Description:

This product is produced strictly in accordance with the technical requirements of the national standard SJ/T10796-2001, and meets the technical requirements of the British MOB standard and the American CISCA standard.

Floor specification: 600 × 600mm

Anti static performance: 1 × 104~1 × 1010 ohms

Floor laying height: The total laying height from the ground to the floor surface can be selected as 120mm or more.

Floor appearance dimensions:

The limit deviation of the board width is 0/-0.4mm;

Limit deviation of plate thickness ± 0.3mm

Surface flatness ≤ 0.6mm

The perpendicularity of adjacent edges is ≤ 0.3mm.

Ultimate performance of flooring:

Concentrated load of 4450/5560N (deflection ≤ 2mm)

Uniformly distributed load 23000/33000N/㎡

Ultimate load ≥ 13350/16680N.

Impact resistance of raised floor:

There should be no collapse in the experimental area, and the permanent deformation on the floor should be ≤ 1.5mm.

Rolling load:

2255N， Scroll 10000 times

Deflection ≤ 2mm

Permanent deformation ≤ 0.5mm.

Fireproof performance:

Comply with the technical requirements of GB50222-95 "Code for Fire Protection Design of Interior Decoration of Buildings" and GB8624-97 "Test Method for Non combustibility of Building Materials":

The performance of Class A non combustible materials.

Floor support:

Imitation imported structure, hot-dip galvanized

The support should remain intact for 1 minute under a load of 20KN.

Bracket appearance:

The rust proof layer on the surface of the metal parts is not peeled off and there are no obvious defects.

Typical applications:

Data center, R&D center, control hall, central control room, etc
PREV：Six sided steel plate LY-3003 NEXT：Infrared intelligent ventilation unit