Floor Material Description:

1. This product provides various fiber-reinforced inorganic flooring.

2. The bracket adopts a dedicated bracket and is equipped with a black buffer pad.

Product Technical Performance

This product is produced strictly in accordance with the technical requirements of the national standard SJ/T10796-2001, and meets the technical requirements of the British MOB standard and the American CISCA standard.

Floor specification: 600 × 600 × 28/30mm

Floor laying height: (total laying height from ground to floor surface) 50mm or more is optional.

Floor appearance dimensions:

The limit deviation of the board width is 0/-0.4mm;

Limit deviation of plate thickness ± 0.3mm

Surface flatness ≤ 0.6mm

Adjacent edge perpendicularity ≤ 0.3mm

Mechanical properties of flooring:

Concentrated load of 1960/2950/4450N (deflection ≤ 2mm)

Uniformly distributed load 9720/12500/23000N/㎡

Ultimate load ≥ 5880/8850/13350N.

Impact resistance of raised floor:

There should be no collapse in the experimental area, and the permanent deformation on the floor should be ≤ 1.5mm.

Fireproof performance:

Comply with the technical requirements of GB50222-95 "Code for Fire Protection Design of Interior Decoration of Buildings" and GB8624-97 "Test Method for Non combustibility of Building Materials":

The performance of Class A non combustible materials.

Floor support:

The support should remain intact for 1 minute under a load of 20KN.

Bracket appearance:

The rust proof layer on the surface of the metal parts is not peeled off and there are no obvious defects.

Site requirements for use

The original ground is flat and the indoor air is well ventilated.